- How to netboot server software#
- How to netboot server password#
- How to netboot server download#
Under Boot Device Priority, you see a list of boot devices: Select the Boot Device Priority field by pressing the down arrow and press Enter.Select the Boot menu by pressing the right arrow key.When you are prompted to enter the setup, press F2:.After the process is finished, type reboot and press ENTER to restart the Sensor.You see a message when the image is loaded. At the prompt, type the following command and press Enter:įor example: loadimage sensorsw_8000_81527 Set the TFTP server IP address. Type the following command and press Enter:įor example: set tftpserver ip 192.168.1.100.Set the Sensor IP address. Type the following command and press Enter:įor example: set sensor ip 192.168.1.10 255.255.255.0.
How to netboot server password#
Log on using temporary logon admin and password admin123. The Sensor prompts you for your user name and password. If it is working correctly, you see Initializing system. Type the name of the nbi file (including extension) stored in the root directory of the TFTP server and press ENTER (for example, bootimage_8.1_8000.nbi). The Sensor prompts you for the boot-file name. If a gateway is needed, type this address. The Sensor prompts you for the Gateway IP address. Type the TFTP server IP address at the Sensor prompt (for example, 192.168.1.100). Type the Sensor IP address, for example, 192.168.1.10. The Sensor reboots and then prompts you for an IP address for itself. Press ESC twice to return to the main menu. Select the Fail-Safe Boot field and change it to Disable. Press ESC twice to return to the main menu. Press + to move eepro100 to the top of the list of Boot Devices. Under Boot Device Priority, you see a list of boot devices:. Select the Boot Device Priority field by pressing the down arrow and then press ENTER. Select the Boot menu by pressing the right arrow. When prompted to enter Setup, press F2. NOTE: Rebooting causes all traffic passing through the Sensor to stop. Turn on the Sensor or reboot it, as appropriate. Connect the Sensor Management port to the local LAN where the TFTP server resides. To make this connection, use HyperTerminal on Windows or Minicom on Linux. Connect to the Sensor console port using the console cable. Save the Netboot image file and the extracted Sensor image file in the root directory of the TFTP server. (For example, file name is bootimage_8.1_8000.nbi, which indicates Netboot image 8.1 for an 8000 Sensor.) How to netboot server download#
Download the Netboot image that is the same major version as the Sensor image downloaded previously.
How to netboot server software#
The extracted Sensor software image does not have an extension (for example, sensorsw_8000_81527).
Extract the Sensor image file from the jar file:. Download the Sensor image file (for example, file name: sensorsw_8000_81527.jar indicates Sensor software 8.1.5.27 for an 8000 Sensor). This download requires a user name and password, or a Grant Number as the user name and password, using uppercase. TFTP server that uses a non-fragmented data transfer method.
0 kommentar(er)
